Availability: 9 in stock
ACDelco Gold (Professional) Lift Supports are a high quality alternative to Original Equipment (OE) parts. These supports are the ideal replacements for your worn out lift support struts. The pressurized, gas charged cylinders feature chromed rods and superior seals for a lasting, quality lift support replacement. Each lift support is custom engineered and manufactured to top industry standards with self-cleaning piston technology and a patented multi-lobe sealing system. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. WARNING: Cancer and Reproductive Harm –
hood-lift-support
| Brand | |
|---|---|
| Part Number (MPN) |
510-310 |
| SKU |
510-310 |
| UPC / GTIN |
036666135213 / 00036666135213 |
| Condition |
New |
| Other Names |
12333252 |
| HazMat |
This part contains hazardous materials. Extra shipping costs apply. |
| Compressed Length |
4.93 |
| Cylinder Outside Diameter |
22 |
| Damping Type |
Gas |
| End 1 Size |
7.93 |
| End 1 Type |
Blade Hole |
| End 2 Size |
7.93 |
| End 2 Type |
Blade Hole |
| Extended Length |
6.38 |
| FAQ – Answer 1 |
Yes. To achieve maximum product performance and service life, it is recommended to mount your lift strut ‘shaft down’ |
| FAQ – Question 1 |
Is there a certain direction for lift supports to be mounted? (i.e. ‘shaft up’ or ‘shaft down’?) |
| Features & Benefits – Bullet 1 |
High quality seals keep lift support fluids and gases contained within the strut components, resulting in extended product life |
| Features & Benefits – Bullet 10 |
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models |
| Features & Benefits – Bullet 2 |
Chromed rod increases rust and corrosion resistance for a higher quality, longer lasting, lift support |
| Features & Benefits – Bullet 3 |
Rubber O-ring piston seal for controlled lift |
| Features & Benefits – Bullet 4 |
Heavy gauge steel pressure tube provides long life |
| Features & Benefits – Bullet 5 |
Polytetrafluroethylene (PTFE) backup ring gives enhanced performance |
| Features & Benefits – Bullet 6 |
Patented multi-lobe seal offers improved leak protection and long life |
| Features & Benefits – Bullet 7 |
Self-cleaning piston assembly delivers smooth operation and consistent performance |
| Features & Benefits – Bullet 8 |
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional |
| Features & Benefits – Bullet 9 |
Premium aftermarket replacement part |
| Fully Open Length (in) |
6.38in |
| Fully Open Length (mm) |
162.1mm |
| Good Maintenance Practices – Section 1 – Bullet 1 |
Periodically clean the surface of the rod with a dry, soft cloth. |
| Good Maintenance Practices – Section 1 – Bullet 2 |
Do not use oil, silicone, adhesives, or anything that might leave a sticky residue on the rod, which could ultimately attract dust or dirt. |
| Good Maintenance Practices – Section 1 – Bullet 3 |
Avoid anything that could scratch the rod, such as clamps or clips. |
| Good Maintenance Practices – Section 1 – Bullet 4 |
Avoid abrasive household cleaners, as they can scratch the rod as well. |
| Good Maintenance Practices – Section 1 – Header |
Imperfections on the strut rod, which would allow for oil and pressurized gas to escape the strut components, can decrease the overall life of your lift support. To help improve the service life of your lift support, keep the rod clean and free of nicks: |
| Good Maintenance Practices – Section 2 – Header |
It is recommended to replace your lift supports in pairs to ensure the performance and safety of the related component, such as your hood, hatchback, or liftgate. |
| Inner Shaft Diameter |
0.394 |
| Internal Rebound Spring |
No |
| Maximum Force |
119 |
| Meets or Exceeds Original Equipment Manufacture Specifications |
Yes |
| Minimum Force |
119 |
| Outer Cylinder Color |
Black |
| Outer Cylinder Diameter (in) |
0.875 |
| Outer Cylinder Diameter (mm) |
22.22 |
| Outer Cylinder Material |
Steel |
| Programming Required |
No |
| Signs of Wear & Troubleshooting – Section 1 – Bullet 1 |
Lift support slowly closing/lowering after opening/raising |
| Signs of Wear & Troubleshooting – Section 1 – Bullet 2 |
Support not fully opening |
| Signs of Wear & Troubleshooting – Section 1 – Header |
Signs of wear for lift supports include but are not limited to: |
| Stroke Length |
1.45 |
| Travel Length (in) |
1.45 |
| Travel Length (mm) |
36.8 |
| Year |
1988 |
| Make |
Chevrolet |
| Model |
Corvette |
| Body & Trim |
35th Anniversary Edition |
| Engine & Transmission |
5.7L V8 – Gas |
| AMS |
4003 |
| Autokool |
ES114667 |
| BWD |
VV1292 |
| Balkamp |
819-5311 |
| Chevrolet |
14043065 |
| Dorman |
916-613 |
| ECHLIN |
VVS1948 |
Vehicle Fitment
